The dry cleaning process for carpets is not always dry, often involving a little moisture that helps break down dirt and dust, and to activate the cleaning solution. Because of its minimal moisture – an interesting feature of some services to describe dry cleaning as "controlled humidity" cleaning – this process can remove certain elements that cannot be cleaned tightly.  

Dry Cleaning Process in Factory Carpets

As with other clothes and fabric cleaners, carpet cleaners can use different processes to achieve the same results, with some including limited steaming presence in the process. But the typical process for removing dirt and sand from the carpet occurs as described in the three steps below. You can click here https://www.andonianrugs.com/services/ to buy the finest carpet for your area.

1. Vacuuming thoroughly

After taking the carpet from your home and bringing it to a cleaning facility, carpet service usually starts a controlled vacuum by vacuuming, which can involve various machines and methods, depending on the specific needs of your carpet.  

2. Dry Solution Applied

Solutions used to remove dirt and sand vary according to the company, but they serve the same function: to penetrate the deepest fibers of the carpet, hold dirt and dirt in suspension until they are cleaned, work that might involve a minimum amount of moisture, as would be the case if steaming is in the process of removing dry particles

3. Drying as needed

If a service uses a controlled humidity method, it will dry the carpet afterward, as will be done if traditional wet processes are used. After the carpet is dry, he is checked for cleanliness, photographed and repacked to be sent to the owner. If the owner is satisfied with the results, the process is complete.